Gustard H10 Headphone Amp Class A, Balanced/Unbalanced, Ex Sound, Powerful, Musical
Listed · 309 Views
0 Watchers
Items from this seller
This listing has ended.
Listings Similar to Gustard H10 Headphone Amp
Time Left: None
This listing has ended.
Condition | |
Payment methods | |
Ships from | Fort Walton Beach, FL, 32547 |
Ships to | Worldwide |
Package dimensions | unspecified |
Shipping carriers | USPS or UPS |
Shipping cost | $24.00 |
Average | Research Pricing |
Top of the line Gustard H10 Headphone amp, balanced and unbalanced inputs, Class A design with beefy power supply and dual mono type configuration, ex clone of a Violectric 200, series of switches on the back to adjust gain settings for left/right channels, original box, power cord and packing. It has always been in a non smoking climate controlled environment. It is in very nice well cared for condition. It sounds excellent with plenty of power. It is detailed, open, dynamic, extended, spacious, transparent, smooth and musical. It is dead quiet. See the impressive specs below. The shipping cost will include fast shipping, insurance and tracking number emailed. Buy with confidence, see my feedback. Good listening, SonnY :)
Technical Specifications:
eatures:
1.H10 is a high-current discrete Class A output stage headphone amplifiers, each channel consists of two independent amplification circuit, has RCA inputs, balanced input, you can easily connect a variety of sources.
2 machine using a buffer amplifier plus pre-amplification stage main components. Buffer preamp gain adjustment function with four segments, with the four pairs of audio power output circuit tubes on the CPI, you can easily drive a variety of different impedance headphones.
3 using two 25W seal ring cattle, independent power between left and right channels, effectively reducing the left and right channel crosstalk.
4.AC115V/230V international voltage input.
5 Adjust the volume potentiometer placed at the back of the input stage, effectively shortening the audio channel path, reducing interference.
6 start-up delay, DC offset, overload, protection circuitry to ensure the safe use of the machine.
7 aluminum chassis, before grinding Shahoulasi processes, machines all black.
8.RCA single-ended and balanced XLR inputs, input switching and gain adjustment.
9 tri-band balanced sound correctly, the output resistance low current, suitable for most headphone mix.
10. Rigorous design, reasonable layout, elegant lines, solid materials.
Technical Specifications:
Signal Input: 2x XLR female, balance
2x RCA, unbalanced
Maximum input level: +21 dBu, impedance 10kΩ
Input impedance: XLR: 10kΩ, RCA: 68kΩ
Input Sensitivity: +6 dBu
Main amplifier gain: +8 dB
Main amplifier gain adjustment range: -4 / +2 / +8 / +14 / +20 dB
Frequency response: 0-55kHz (-0.5dB)
Damping Factor:> 400 @ 50Ω
Dynamic range:> 128dB (A-weighted)
Background noise: <-100dBu (A-weighted)
THD + N (1kHz 1W @ 100Ω): <0.00035%
THD + N (1kHz 0.5W @ 32Ω): <0.0007%
Crosstalk:-110db (1kHz)
Headphone Output: 1x 6.35mm TRS Jack
output powerifferent impedance has different output power
Output power: 570 mW (600 ohm load); 2200 mW (100 ohms); 2700 mW (50 ohms); 2000 mW (32 ohms); 1000 mW (16 ohms)
Power supply voltage: 230V AC/115 AC; 50/60Hz
Power consumption: ≤ 20VA
Machine Standard: GB a three-prong power cord
Machine size (not included prominent part): length × width × height = 273mm × 190mm × 70mm
Package dimensions: length × width × height = 385 × 280 × 150mm
Weight: Net Weight 3.3KG, including packaging 4KG
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Item can be returned within 7 days of receipt.
General Terms
Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.
Refunds
Buyer will receive a full refund in the original payment method less any shipping charges.