Here is great sounding Jolida JD-302BRC tube integrated amp from a smoke free home. You will not find a finer example of this beautiful sounding EL34 based integrated tube amp. I've had this amp for 10 years and used very little (less than 40 hours) in a second music room which now occupied by my restored Marantz 2275. The tubes have been upgraded with a matched set of Wing "C" along with upgraded power and pre-amp tubes. The picture will show a slight ding on the very left side of the face which only noticeable close up and for that it will be listed as very good. This amp works as it should and will include everything that you see in the pictures; the original box and packing, manual, cord and remote.
Returns accepted within 7 days after delivery and must be returned in original condition with no damages to the amplifier and shipping items and include everything as shown and re-package the exact same way as delivered. Buyer pays shipping for return and will receive purchase refund minus any and all shipping charges. Buyer is responsible for reviewing and filing for any damages done to the amplifier by delivery logistics.
Specifications Rated Output Power: 50 W per channel at 8 ohms, 25Hz to 50KHz Maximum Power Output: 75 W per channel at 4 ohms, 1KHz Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz +
1dB Bandwidth: 15Hz to 80KHz +
3dB; 0dB 50 W 1KHz Distortion THD: Less than 1% at 50 W output, 28Hz to 15KHz Circuit Type: Ultra Linear, Class AB Input Impedance: 100Kohms Input Sensitivity: 500mV at 1KHz for 50 watt output Output Impedance: 4 ohms and 8 ohms Negative Feedback: Less than 5 dB Noise and Hum: 85dB below rated output Tube Complement: 2 matched pairs (4) of EL34/6CA7 power output; 2 pcs. 12AX7A/ECC83 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers. Power Requirements: 110V-120 VAC 50Hz 180 watts-standby, 450 watts maximum (220 VAC 50Hz option) Dimensions: 17 inches (43cm) wide by 15 inches (38cm) deep by 7.5 inches (19 cm) high Weight: 39 pounds (18 Kg) net, approximately 46 pounds (21 Kg) packaged Bias Settings: 400 millivolts +
50 mV Fuse: 110-120 VAC, 6.3 Amp Slo Blo; 200 - 240 VAC, 3 Amp Slo Blo Size 5mm X 20mm Construction Details and Features: Fully Integrated Stereo Amplifier: Input 400mV driving 50 watts, maximum 75 watts output. · EZ Biasing - Biasing made simple. Turn the screw until the light goes on, the tube is biased. Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design. Secondary can be configured for a 4 ohm or 8 ohm load · State of the Art Components: ALPS audio potentiometer, gold plated RCA jacks, RCA output for subwoofer. Remote Control: Standby, volume and mute