Teac TN-420 Psychedelic Turntable
Listed · 1260 Views
This listing has ended.
Listings Similar to Teac
Time Left: None
This listing has ended.
Condition | NEW |
Payment methods | |
Contact seller after sale to pay viaVISA/Mastercard, American Express, Discover, Certified check, Personal check or Wire Transfer | |
Ships from | Bensalem, PA, 19020 |
Ships to | United States |
Package dimensions | 20.0" × 18.0" × 10.0" (25.0 lbs.) |
Shipping carrier | FedEx |
Shipping cost | Log in to see price |
Original accessories | Box, Manual |
Average | Research Pricing |
The New Teac TN-420 Psychedelic
Turntable
new in box full warrany -- FAR OUT MAN ! Heavy ! Groovy !
normally $489 -- spaced out intro price $399.00
Feature List
- 2-speed
Turntable including 33-1/3 and 45 RPM for LP/EP record playback - Unique
Tie-Dye finish - Built-in
phono equalizer amplifier for MM type cartridge (Line/Phono output
switchable) - USB
digital output for transferring music from vinyl to Mac or PC - Belt-drive
turntable for enhanced speed control and consistency - Manual
arm lifter for direct tone arm control - Static
balanced S-shaped Tone Arm - Replaceable
Head shell - Anti-skating
system prevents tracking errors - Heavy-weight
Aluminum Die-cast Platter - Japan
made MM-type cartridge (audio-technica AT95E) included - Corrosion
resistant gold-plated terminals
TN-420 SPECIFICATIONS
Turntable
section
Drive
System
Belt
Drive
Motor
DC
Motor
Speed
33 1/3 RPM, 45
RPM
Rotation Speed
Variation
+/–2%
Wow and
Flutter
0.2%
Signal-to-Noise
Ratio
67dB or higher
(A-weighted, 20kHz LPF)
60dB
or higher (unweighted, 20kHz LPF)
Platter
Aluminum
Die-cast
Diameter of
Platter
12",
30cm
Tonearm
section
Type
Static Balance,
S-shaped
Effective Arm
Length
8.8",
223mm
Stylus Pressure
Range
0 to
5g
Supported Cartridge
Weight
3.5 to
6.5g
Anti-skating
Adjustment
Supported
Cartridge
section
Type
MM type
(audio-technica AT95E factory installed)
Stylus
Shape
Elliptical
Stylus
Construction
Bonded Round
Shank
Mount
Half
inch
Frequency
Response
20Hz to
20kHz
Channel
Separation
20dB at
1kHz
Channel
Balance
2.0dB
Tracking
Force
1.5 to
2.5g
Vertical Tracking
Angle
20
degrees
Supported Load
Impedance
47k
ohms
Output
Voltage
3.5mV (1kHz,
5cm/sec.)
Stylus
Pressure
2.0g
+/–0.5g
Cartridge
Weight
5.7g
+/–0.5g
Head-shell
Weight
10g (including
Screws, Nuts and Wires)
Replacement
Stylus
audio-technica
ATN95E
Phono Equalizer
Amplifier
Type of
Amplifier
MM type (On/Thru
switchable)
Analog
Output
Connector
RCA Pin jack
(Gold-plated)
Output
Voltage
Phono/Line
switchable
Phono
Output
4.5mV
+/–3dB
Line
Output
120mV
(–13dBV)
USB Output
section
Connector
USB B
type
Output
Signal
PCM
48kHz/16-bit
Supported
OS
Windows 7
Windows
8
Windows
8.1
Windows
10
OS
X Lion (10.7)
OS
X Mountain Lion (10.8)
OS
X Mavericks (10.9)
OS
X Yosemite (10.10)
OS
X El Capitan (10.11)
macOS
Sierra (10.12)
Power
AC 100 to 240V,
50/60Hz
Power
Consumption
1.5W (less than 0.5W
at Standby)
Overall
Dimensions
(W
x H x D)
16.5" x 4.6" x
14.0"
420
x 117 x 356 mm
Weight
Approx. 10.8 lbs.
4.9 kg
Accessories
Felt Mat, EP
Adapter, Counter Weight, Head-shell (audio-technica AT95E), Platter, Dust Cover,
Rubber Feet for Dust Cover x2, Hinge x2, RCA Audio Cable, AC Adapter
(GPE053A-120050-1), Owner's Manual (including Warranty
Card)
TN-420
OVERVIEW
Turn
turn turn
What
better way to celebrate the 50th Anniversary of the Summer of Love than with the
certifiably far-out TN-420 turntable?
Beneath
the groovy exterior, this 2-speed turntable combines a high density MDF base
with an expertly machined aluminum platter to deliver incredible resonance
rejection, speed control and audio fidelity. And for easy connection to
virtually any audio system, the TN-420 features switchable Phono / Line level
outputs on RCA connectors and a digital output on USB for easy connection to a
Mac or PC for playback and archiving of your favorite LPs.
A fusion of unique appearance and excellent sound.
■
A unique Tie-Dye color design
The
eye-catching appearance of the TN-420-TD is achieved through a modern
hydro-graphics printing process and adds a groovy touch to any music room. And
just below this colorful is a high density MDF cabinet designed to minimize
unwanted resonance during playback.
■
Aluminum belt-drive turntable
The
high inertia aluminum die-cast platter is driven by a high-torque DC motor with
durable Neoprene® rubber belt to achieve stable rotation. In addtition, highly
accurate rotation of this platter is maintained by a polished spindle (machined
from a stainless steel block) and a durable bronze spindle
holder.
■
MM type cartridge phono equalizer amplifier
Enjoy
vinyl playback with any amplifier. The TN-420-TD supports both both Phono and
Line output, and allows you to enjoy your favorite albums on virtually any music
system.
■
Built-in USB Digital Output and Analog Phono/Line Output
An
On-board Analog-to-Digital converter from Texas Instruments allows you to
transfer music via USB to your PC and to create CD-quality backups of your
favotire albums. In addition, a pair of gold-plated RCA connectors are employed
for reliable connection to either the Line or Phono
inputs of your receveiver and amplifier.
■
Corrosion resistant gold plated terminals
To
ensure years of reliable performance, Gold-plated terminals on the head shell
connectors prevent oxidation over time.
■
Static balanced S-shaped tone arm
Due
to increased mass, an S-shaped tone arm is employed for high tracking accuracy.
Coupled with an adjustable anti-skating mechanism, the TN-420-TD will help you
to get up and rocking in no time.
■
2-speed Turntable including 33-1/3 and 45 RPM for LP/EP record playback
Perfect
for albums or singles, the TN-420-TD features both
33-1/3 and 45 RPM playback and a manual tone-arm lifter for complete control of
your music experience.
■
audio-technica MM(VM)type phonograph cartridge AT95E
The
TN-420-TD comes with an audio-technica VM-type cartridge, which carries a
reputation for accuracy, clarity and
detail.
Feature List
- 2-speed
Turntable including 33-1/3 and 45 RPM for LP/EP record playback - Unique
Tie-Dye finish - Built-in
phono equalizer amplifier for MM type cartridge (Line/Phono output switchable) - USB
digital output for transferring music from vinyl to Mac or PC - Belt-drive
turntable for enhanced speed control and consistency - Manual
arm lifter for direct tone arm control - Static
balanced S-shaped Tone Arm - Replaceable
Head shell - Anti-skating
system prevents tracking errors - Heavy-weight
Aluminum Die-cast Platter - Japan
made MM-type cartridge (audio-technica AT95E) included - Corrosion
resistant gold-plated terminals
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.