Harmonic Technology Cyber Wave RCA 1.5M Cables w/Power Supply & Case

Harmonic Technology Cyber Wave RCA 1.5M Interconnect Cables w/Power Supply & Case in excellent condition. 

Made in the USA.

Intended for Source to Preamp

One of the best sounding cables made (especially at this high valued low price) and highly recommend by Michael Fremer and the Weinhart Design Audio team

It is best to call David Weinhart with any questions (see information below):

Harmonic Technology's Light Analog Module (LAM) Photon Transducer is a tiny module built into the cable right at the RCA or XLR plugs. The LAM converts voltage to laser light, which is then transmitted via audio-grade glass fiber to a receiver in line with the RAC or XLR plug at the other end of the line, which converts the light back to voltage. Once the conversion to light has taken place, the light moves at, of course, the speed of light (ca 186,000 miles per second), with no resistance, capacitance, "skin effect," inductance, RFI or EMI reception, etc. You needn't worry about crossed power cords or static electricity; dressing cables to prevent induced hum or keeping them off the floor become nonissues. In fact, Harmonic Tech claims no signal loss of any kind in cable runs of up to 200 meters. And with no conductive wires between components, all potential ground loops are eliminated.
There is no digital conversion, nor is amplitude or frequency modulation involved. The process is purely analog. Because the signal is unidirectional, there is no back-reflectivity of the signal.


Photon light signals make it immune from EMI and RFI interference Musical information has preserved to a greater degree because there is no digitalization has been used. No sampling or mathematical algorithms problems exist. This product assists your system to have even greater depth, airiness and wider soundstage Easy component impedance matches, therefore your components can perform at its best. (Input from the PREAMP might be 20,000 ohm, the output from the Photon AMP is only 75 ohm) The bass is the tightest, deepest, and most articulate, with no bloat—just rich tones and superb definition Highs are crystalline, precise and all musical passages unravel with ease One-year warranty Revolutionary Fiber Optic Interconnect Cable As two-channel and multi-channel music and even surround systems reach ever greater resolutions, selecting the best interconnects to bring each component together into perfect harmony has become one of the most crucial and complex decisions. For the truly discriminating, the choice is fiber-optically clear: Blue-jacketed Photon Amp analog interconnects. By adapting glass fiber and laser-like technology to the audio realm, Harmonic Technology has created a new generation of interconnects to bring the ultimate level of performance to audiophiles. Through patent-pending, miniaturized LAM (Light Analog Module) Photon Transducers, the Photon Amp converts audio signals to light pulses, with absolutely no digital conversions, to unleash the sonic depth, accuracy and power of every signal. The entire signal path remains purely analog without any sampling to capture amazing clarity. The photon density modulated optical information travels at the speed of light to eliminate any capacitance, inductances, skin effects, phase shifts and signal loss up to 200m. The result is a seductively quiet background, luscious harmonics and a transparent three-dimensional soundstage. Ground-Breaking Technology The Photon technology is truly ground-breaking. The photon density modulated light signal actually does break the ground between components yielding a signal largely (or completely with i-Pure DC PS) unaffected by humming noise along the ground plane. With the signal path completely isolated from the ground, the Photon Amp ensures that there is no possibility of the cables passing noise between components, nor acting as an antenna for RFI or EMI induced distortions, which keeps the noise floor extremely low and reduces smearing.

Please note: Because there are no physical wires built within the Photon Amp, you should ensure components are on the same ground level. When the destination components of the Photon cable is “AMP”, you should always use the Photon AMP, (not to use the Photon Link to connect to AMP) Operation of the Photon AMP with the i-Pure DC Power Supply. Before any installation, the Power Amplifiers have to turn off first. Plug silver wire(s) to the Photon Cable(s). Plug AC power cord to i-Pure DCPS. Plug AC power cord to AC socket. Assure Power Amplifiers being OFF. Turn on (switch on) i-Pure DCPS. Turn on audio components except Power Amplifiers. Turn on Power Amplifiers.

==========================================

We specialize in Estate Sales & Purchases and an Authorized Retail Dealer for Bowers & Wilkins, Synergistic Research, Aqua, Bryston, Rel, Project, EAR, and many others. Please contact us if you have an estate of audio gear that needs managing, purchasing or if you just have questions. We have a long history and very good at it; we will strive to make it easier for you. Give us a call.

* * * We are always interested in purchasing quality Audio items, LP collections and quality trades are welcomed. * *
Please call David Weinhart and to help you make the best sound possible...weekdays:
from 11-4PM @ 310-472-8880 or on my cell including weekends from 10-10PM at 310-927-226
===============================
Weinhart Design has lots of other items new and used and if you’re in Los Angeles or visiting please accept my invitation to experience our World Class Audio Showroom by appointment and please visit our web site www.weinhartdesign.com
We are always interested in purchasing quality Audio pieces, LP collections, and know we are specialists buying Audio Estates and most quality trades are welcomed.
All sales out of California are State Sales Tax exempt. California State Sales Tax of 9.5% applies for items picked up or shipped to a California address.
We accept payments by Bank Wire Transfers without fees and is the only form of payment on all sales out of the U.S. and Canada. We prefer this method of payment and also makes shipping to addresses other than billing OK.
VISA, MC and Papal are gladly accepted within the U.S. and Canada as long as the charge is approved and were shipping to the BILLING ADDRESS and shipping to the billing address on record and adds a 3% fee to cover costs.
Please call me directly in my world class showroom in Los Angeles weekdays:
from 11-4PM @ 310-472-8880 or on my cell including weekends from 10-10PM at 310-927-2260 and I can answer your questions and help you with all of your new and pre owned needs.

Making better Sound

One system at at a time,

David Weinhart
Weinhart Design, Inc.
President & CEO 
The Audio and Video Expert 
e: [email protected]
www.weinhartdesign.com
2337 Roscomare Road, Studio #1
Los Angeles, California 90077
Showroom: 310-472-8880
Cell: 310-927-2260